Ελληνικά
The new JLR-7500/JLR-7800 (D)GPS navigator will locate your position accurately and gives you a wide range of possibilities ? integrated with the latest technologies ? that will enhance your operational performance. of the new display modes is the 3D highway, which allows you to intuitively view the location of the next waypoint. This 3D guidance is particularly valuable to follow a real-time chain of waypoints along a planned route. The new (D)GPS navigator allows you to plan long distance routes highly effective. It is possible to set Rhumb lines (RL) for short legs, while Great Circle (GC) can be set for the long distance legs ? all possible within the same route. Simply make your selection for each leg to reach your destination effortlessly. All information is displayed on a highly visible 5.7-inch LCD display, featuring added sharpness and contrast compared to the previous version. Many display modes are readily available and selectable from the menu, such as navigation, CDI, highway, track plotting and service and information screens. The display has four dim modes, allowing adjusting at your own convenience.
The new display design allows you to carry out all operations simply by using the unified keyboard layout. The keyboard is solid and responsive, which allows for precise operation. The keys are also backlit, making it easy to operate in low-light settings on the bridge. The compact design of the JLR-7500/JLR-7800 incorporates a new intuitive interface, providing enhanced ergonomics and user friendliness. The logic of the controls and excellent on-screen menus will greatly shorten most users’ learning period. With the new (D)GPS navigator, entering data is just as simple as creating a (SMS) text message on your phone. The consistency in the keyboard layout allows entering waypoint data fast and in a natural way.
The newly developed sensors includes RAIM, which is to access the integrity of GPS signals. If multiple satellite signals are picked up, this system will check if the position fix is consistent with the computed position, assuring higher reliability than conventional methods. The (D)GPS navigator integrates four configurable NMEA ports. This advanced feature will allow you to e.g. have one port configured with the latest NMEA standard, while another port is capable of running a previous version. In this way you can connect older equipment onboard. It also has one in and two contact outputs and LAN, which facilitates route data transfer and/or interswitching. The display is very compact and can be mounted virtually anywhere, allowing for a flexible installation approach in confined spaces. The base of the sensor is designed for an easy installation, either on a pole or on an extension mast. The base also includes a slot allowing for easy cable management, significantly reducing installation time. Up to 10,000 waypoints can be stored in the internal memory. All waypoints can be named and renamed up to sixteen characters. You can make 100 routes with 512 waypoints per route, which can be entered randomly, and there’s room for 2000 points for the ship’s track and up to 1000 for events and marks.
Via a LAN connection, you can easily connect two displays. The second display is fully operable and auto synchronises with the main display, which is directly connected to (D)GPS sensor, allowing e.g. acknowledging alarm or adjusting waypoints/routes at a secondary location on the ship. You can also set for a dual installation, having two (D)GPS sensors connected to two different displays to simply switch when necessary, assuring you always on.
FEATURES
3D HIGHWAY
SMART ROUTE CALCULATION
DISPLAY MODES
UNIFIED DESIGN
SIMPLE OPERATION
KEY IN DATA
SATELLITE INTEGRITY CHECK
Port flexibility
PORT FLEXIBILITY
EASY INSTALLATION
MY MEMORY
LAN ADVANTAGE
Specifications
Specs
| Model | JLR-7500 | JLR-7800 | |
|---|---|---|---|
| IMO compliant | |||
| General | |||
| Display | 5.7-inch, white LED backlit, 320 by 240 pixels | ||
| Dimmer | 4 stages (bright, middle, dark, off) | ||
| Power supply | 10.8V to 31.2V AC, <10 W | ||
| Serial data in/out | output: 4 ch (IEC61162-1), input: 1 ch | ||
| Contact signal in/out | output: 2 ch, input 1 ch | ||
| LAN | built-in 10/100 Mpbs | ||
| Data backup | display: flash ROM, sensor: SRAM with battery | ||
| Waypoint | 10,000 points, event memory 1000 points, WPT name: 16 characters | ||
| Waypoint input | LAT/LON, bearing/range, event, TD | ||
| WPT/route data transfer | via LAN and RS-232C | ||
| Track/route | 2000 points, 100 routes with 512 WPT per route | ||
| Plot scale | 0.2, 0.5, 1.2, 5, 10, 20, 50, 100, 200, 300 NM | ||
| Plot interval | 1 up to 60 min (1 sec) or 0.01 to 99.99 NM (0.01 NM) | ||
| Navigation calculation | select Great Circle and Rhumb line for each leg (total distance up to 99,999 nm) | ||
| Screen mode | LAT/LON, CDI (highway), trackplot, GPS sat. info, enter WPT/route planning, WPT info | ||
| Alarms | arrival, anchor, boundary, off-course, no position fix, speed, trip, 1) temperature, 1) depth, HDOP | ||
| Adjust magnetic variation | auto or manual | ||
| Geodetic system | 46 systems | ||
| Units | NM/KTS, kM/kPH, mi/miPH, m, ft, fm, °C or °F | ||
| LORAN C/A convert | convert LAT/LON to TD of LORAN C/A | ||
| GPS specs | |||
| Receiver/sensor type | multichannel (12 ch), SBAS (1 ch) | multichannel (12 ch), SBAS (1 ch), DGPS integrated | |
| Frequency | 1575.42 MHz ±1 MHz (C/A code) | ||
| Satellite tracking | up to 12 satellites | ||
| SBAS | WAAS, MSAS, EGNOS | ||
| Accuracy | 13 m (HDOP <4 SA off), 7 m (SBAS) 2dRMS | 13 m (HDOP <4 SA off), 7 m (SBAS), 5 m (beacon) 2dRMS | |
| Power supply | 10.8V to 31.2V AC, <1.5 W | 10.8V to 31.2V AC, <2.5 W | |
| NMEA | |||
| Version | 1.5, 2.1, 2.3 | ||
| Bit rate | 4800, 9600, 19200, 38400 | ||
| Output | GGA, RMC, GLL, VTG, GSA, GSV, DTM, GBS, GRS, GST, ZDA, GNS, 2) MSS, ALR, 3) VDR, 3) VHW, APB, BOD, BWC, BWR, RMB, XTE, ZTG, AAM, ALR, RTE, WPL, ACK | ||
| Input | HDT, THS, BDT, DPT, MTW, CUR, VBW, VHW, ACK, WPL, RTE ALR | ||
| Interval | 1, 2, 3, 4, 5, 6, 7, 8, 9 sec and off | ||
| Environment | |||
| Operating temperature | sensor -25° to 55°C, display -15° to 55°C | ||
| Storage temperature | sensor -40° to 70°C, display -25° to 70°C | ||
| Operating humidity | 0% to 93% non-condensing | ||
| Water resistance | sensor IEC60945 (ed.4), USCG CFR-46, display IP44 | ||
| Optional items | |||
| Rectifier | NBG-320 | ||
| Printer (table mount) | DPU-414 | ||
| Connection box | CQD-10 | ||
| Data switching unit | NCZ-777 | ||
| Junction box | NQE-7700A | ||
| Extension cable (15 m) | CFQ-9000 | ||
- 1) Via external temp sensor/echo sounder
- 2) Only JLR-7800
- 3) Via external speed log/current meter
DISPLAY
ANTENNA JLR-7500
ANTENNA JLR-7800
RETIFIER (OPTION)
WHAT’S STANDARD IN THE BOX
- Display1
- (D)GPS sensor
- Cables
- Installation parts
- Data connector
- Spare parts
- Manual
Cables
| Which cables? | Std. |
|---|---|
| Power cable display | 2 m |
| Sensor to display | 10 m (JLR-7500) |
| Sensor to display | 15 m (JLR-7800) |
| Display to junction box | 5 m |
1. Including bracket
All specifications are subject to change without notification.
Downloads
|
|
